Seeed Grove - Solid State Relay V2

Seeed Grove - Solid State Relay V2 Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors, which provide a much faster-switching speed than the mechanical relays. The Grove - Solid State Relay V2 is based on the high-quality G3MC202P module, which allows you to use a 5VDC to control MAX. 240VAC. With the help of Grove interface, it becomes very convenient to use the SSR with your Arduino. 1*Please be careful when working with high voltage AC load, please do not operate with power on. 2*This relay only works with AC load, if you use DC load, once the relay is turned on, it will always stay on.3*Due to the leakage current, we do not recommend you to use this relay with low power appliance. Features Advantages over mechanical relays: 1-Solid-state relays have much faster-switching speeds compared with electromechanical relays, and have no physical contacts to wear out. 2-Totally silent operation. 3-No physical contacts mean no sparking, allows it to be used in explosive environments, where it is critical that no spark is generated during switching. 4-Increased lifetime, even if it is activated many times, as there are no moving parts to wear and no contacts to pit or build up carbon. 5-Compact, thin-profile SSR of monoblock construction with an all-in-one lead frame incorporates a PCB, terminals and heat sink, which is much smaller than mechanical relays, and can integrate more channels. Disadvantages: 1-When closed, higher resistance (generating heat), and increased electrical noise. 2-When open, lower resistance, and reverse leakage current. 3-Only works for AC laod. Typical Applications Operations that require low-latency switching, e.g. stage light control. Devices that require high stability, e.g. medical devices, traffic signals. Situations that require explosion-proof, anticorrosion, moisture-proof, e.g. coal, chemical industries. Pin Map Technical Details Dimensions 40mm x 20mm x 25mm Weight G.W 131g Battery Exclude Operating Input Voltage 4~6V Rated Input Voltage 5V Load Voltage Range 75 to 264 VAC 50/60 Hz Rated Load Voltage 100 to 240 VAC 50/60 Hz Load Current 0.1 to 2 A Leakage Current 1.5 mA max. (at 200 VAC) Insulation Resistance 1,000 MΩ min. (at 500 VDC) Operating Temperature -30°C to 80°C (with no icing or condensation) Operating Humidity 45% to 85%RH Zero Cross support Part List Grove - Solid State Relay V2 1 Grove Cable 1 A set of Acrylic Shell 1 ECCN/HTS ECCN EAR99 HSCODE 85364110