Bambu Lab AMS 2 Pro - Automatic Material System

Product Features Active Air Vent 65°C Filament Drying Air-tight Filament Storage Up to 24-color/Multi-material Printing Brushless Servo Feeding Motor RFID filament sync Important notice The AMS requires specific accessory configurations for various Bambu Lab 3D printers. Please see the required accessories from the section below. See the Multiple AMS Units Connection Guide for detailed setup instructions. To connect AMS 2 Pro unit(s) to A1 series printer, an A1 series AMS Hub (SA013) is required. A1 series printer can connect up to 4 AMS units(including AMS HT, AMS, AMS 2 Pro). Note: AMS lite cannot be used in combination with other AMS units. To connect a single AMS 2 Pro unit to X1/P1 series printer, a Filament Buffer(SA003), a PTFE Tube Coupler(FAZ006), and a 4-pin Cable(CAB002-N) are required. X1/P1 series printer can connect up to 4 AMS units(including AMS HT, AMS, AMS 2 Pro). To connect one or two AMS 2 Pro unit(s) to P2S, a P2S Filament Buffer (SA011) is required. P2S printer can connect up to 4 AMS units (including AMS, AMS 2 Pro) and 4 AMS HT units. To connect a single AMS 2 Pro unit to H2S/H2D/H2C, no extra accessory is required. H2 series printer can connect up to 4 AMS units(including AMS, AMS 2 Pro) and 8 AMS HT units. For drying function: A1/X1/P1 One Switching Adapter is required for each AMS 2 Pro unit. P2S printer can power one AMS 2 Pro unit for drying without the switching adapter. H2S printer can power one AMS 2 Pro unit for drying without the switching adapter.